UNS S20161
2014-09-09 14:21:24 Origin： Remark：0 Click：
UNS S20161- DATA SHEET17Cr-4Ni -5Mn-3SiAustenitic steel TYPICAL APPLICATIONS Chemical equipmentMechanical parts used...
UNS S20161 - DATA SHEET
17Cr-4Ni -5Mn-3Si Austenitic steel
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
PRODUCT DESCRIPTION
The alloy is usually produced by AOD followed by electroslag refining (ESR).
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the softened condition.
Final heat treatment - solution treatment.
MATERIAL SPECIFICATIONS
. ASTM A959 (2004), A276
AVAILABILITY
Black
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft, flat bar
CHEMICAL COMPOSITION (WEIGHT %)
C(％): ≤0.15
Si(％): 3.00 ~ 4.00
Mn(％): 4.00～6.00
P(％)≤: 0.040
S(％)≤: 0.030
Cr(％): 15.0～18.0
Ni(％): 4.00～6.00
Mo(％): —
Other(％): N0.08~0.20
Si(％): 3.00 ~ 4.00
Mn(％): 4.00～6.00
P(％)≤: 0.040
S(％)≤: 0.030
Cr(％): 15.0～18.0
Ni(％): 4.00～6.00
Mo(％): —
Other(％): N0.08~0.20
MECHANICAL PROPERTIES (MINIMA AFTER FINAL HEAT TREATMENT)
σb/≥MPa: 860
σ0.2/≥MPa: 345
δ(％)≥: 40
ф(％)≥: -
δ(％)≥: 40
ф(％)≥: -
Hardness ≤(HBW): 255
Hardness | ≤HRB: (HRC25)
Cold bending property: N
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers ![]()
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 3000mm
Square bar / Flat bar: 3mm to 2000mm
Plate / Sheet steel / Steel strip: 0.1mm to 2500mm
Width: 8mm to 2500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Previous page：UNS S20153
Last page：DIN 125cr1
