SAE 51430 Ferritic Stainless Steel
2022-08-05 17:00:28 Origin: Remark:0 Click:
SAE 51430 Ferritic Stainless steel is high-alloy steels, AMS 5627 material has high corrosion resistance when compared to other steels due to the presence of large amounts of chromium.
Inventory on hand with Forms Round bars, Flat Bars, Plate.
RAW MATERIAL SPECIFICATIONS - Grade SAE 51430
Special Melting Process - AOD / + ESR
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.40 / 60mm
Official Test Report - issued by TUV - SGS - BV
Chemical compositions (Mass Weight - %)
C (%): ≤ 0.12
Si (%): ≤ 1.00
Mn (%): ≤ 1.00
P (%) ≤: 0.040
S (%) ≤: 0.030
Cr (%): 16.0 ~ 18.00
Ni (%): ≤ 0.75
Cu (%): ≤ 0.50
Mo (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Shapes: bar, flat bars and forgings
Heat treatment condition: hot finished
Tensile strength, σb/MPa: -
Yield strength, σ0.2/MPa: -
Elongation, δ(%): -
Reduction of area, ф (%): -
Hardness under annealed condition | HBW: 210 max.
RELEVANT STANDARDS
ASTM A370 Mechanical Testing of Steel Products.
ASTM E112 Determining Average Grain Size.
ASTM E353 Chemical Analysis of Stainless,Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys.
SHAPES & DIMENSIONS
Round bar: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 500mm
Wire rod: 1.0mm to 13.0mm
Length: Fixed length or random length or based on the customer's special requirement.
Hot search:AMS5627 SAE51430 bars tube Shaft
Previous page:Z8CNT18-10
Last page: 17-4PH & S17400 Precipitation Hardening Steel