FV520B / X5CrNiMoCuNb14-5
2015-02-09 13:54:04 Origin： Remark：0 Click：
TECHNICAL DATASHEET - EN FV520B
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
C (％): ≤ 0.07
Si (％): ≤ 0.70
Mn (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.025
Cr (％): 13.0 ~ 15.0
Ni (％): 5.00 ~ 6.50
Mo (％): 1.20 ~ 2.00
Other (％): Cu 1.20 ~ 2.00, Nb 0.20 ~ 0.70
Yield strength, σ0.2/MPa: 775
Elongation, δ (％): 15.0
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, E-mail: firstname.lastname@example.org.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.