X3CrNiN18-11 datasheet,X3CrNiN18-11 chemical,X3CrNiN18-11 heat treatment
Home > Superalloy > Text

X3CrNiN18-11
2014-09-14 08:59:42   Origin:   Remark:0 Click:

Description X3CrNiN18-11 datasheet, X3CrNiN18-11 Chemical, X3CrNiN18-11 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL DATA SHEET - DIN X3CrNiN18-11
MATERIAL CATEGORY - High temperature high strength steel and superalloy 
MATERIAL SPECIFICATIONS - DIN 17742, 17460, 17480, DIN EN 103021, 10296, 10095
CHEMICAL COMPOSITION (WEIGHT %) 
C (%):     ≤ 0.04
Si (%):    ≤ 0.75
Mn (%):   ≤ 2.00
P (%)≤:   0.035
S (%)≤:   0.015
Cr (%):    17.0 ~ 19.0
Ni (%):    9.50 ~ 11.5
Mo (%):   0.20 ~ 0.50
N (%):     0.10 ~ 0.18
PRODUCT DESCRIPTION
 
The alloy is usually produced by AOD & EAF & BEF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the solution annealing condition.
Final heat treatment - heat treatment / QT / solution treatment
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS 
Hot forming temperature /℃:    1150~850
Heat treatment temperature /℃ | annealing:  -    
Heat treatment temperature /℃ | quenching or solution:  1000~1080 air/ oil 
Heat treatment temperature /℃ | tempering: -
Heat treatment temperature /℃ | ageing:   -
Condition: solution treatment
Mechanical property under room temperature |σb/MPa:  500~ 700                  
Mechanical property under room temperature  |σs≥/MPa:  240    
Mechanical property under room temperature |δ5≥(%):   35   
Mechanical property under room temperature |Akv(DVM):  -    
Heat stability temperature/℃:   -
Non-scale temperature in air /℃:  -   
MECHANICAL PROPERTY UNDER HIGH TEMPERATURE
Mechanical property above 200℃ σ0.2/MPa,at following temperature /℃|200:    150            
Mechanical property above 200℃ σ0.2/MPa,at following temperature /℃|300:    130         
Mechanical property above 200℃ σ0.2/MPa,at following temperature /℃|400:    120        
Mechanical property above 200℃ σ0.2/MPa,at following temperature /℃|500:    110        
Mechanical property above 200℃ σ0.2/MPa,at following temperature /℃|600:    100    
Mechanical property above 200℃ σ0.2/MPa,at following temperature /℃|700:     -
Mechanical property above 200℃ σ0.2/MPa,at following temperature /℃|800:     -
Creep rupture strength /MPa,at following time/h and temperature /℃|1000h|600:   160
Creep rupture strength /MPa,at following time/h and temperature /℃|1000h|700:    60
Creep rupture strength /MPa,at following time/h and temperature /℃|1000h|800:    -
Creep rupture strength /MPa,at following time/h and temperature /℃|1000h|900:    -
Creep rupture strength /MPa,at following time/h and temperature /℃|10000h|600:  114
Creep rupture strength /MPa,at following time/h and temperature /℃|10000h|700:   30
Creep rupture strength /MPa,at following time/h and temperature /℃|10000h|800:    -
Creep rupture strength /MPa,at following time/h and temperature /℃|10000h|900:    -
Creep rupture strength /MPa,at following time/h and temperature /℃|100000h|600:  -
Creep rupture strength /MPa,at following time/h and temperature /℃|100000h|700:   -
Creep rupture strength /MPa,at following time/h and temperature /℃|100000h|800:    -
Creep rupture strength /MPa,at following time/h and temperature /℃|100000h|900:    -
AVAILABLE SHAPES
 
Round bar / flat bar / square bar / valve body / forge ring  
Bright - peeled + polishing /centerless grinding /peeled + slidabrading
Forged - ring /pipe casing /discs /shaft
TYPICAL APPLICATIONS 
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on.
Gas turbine
Turbine blade
Fuel nozzle
Heat treating fixture
Furnace muffle
Nuclear reactor
Turbine engine parts - mechanical gears, gear shaft, main axis, blade
Mechanical parts - bolt and nut, fastener
Heat treatment furnace flask and components, especially in the carbonization.
These materials must stand up to high heat, extreme oxidation potential and recycling.
PRODUCT PROFILE & FORMS  
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD30 - 1200mm, with wall thickness ranging from 15 to 350 mm. 
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to Email (sales@ccsteels.com) or call our resident team of qualified production engineers.

Hot search:X3CrNiN18-11

Previous page:1.4948
Last page:1.4949

Share to: