S34723 Corrosion Resisting Steel
2022-09-05 08:36:28 Origin： Remark：0 Click：
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5642K
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass weight %)
C (％): ≤ 0.08
Mn (％): ≤ 2.00
Si (％): ≤ 1.00
P (％)≤: 0.011 ~ 0.17
S (％)≤: 0.030
Cr (％): 17.0 ~ 19.0
Ni (％): 9.00 ~ 12.00
Cu (％): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Shapes: bars, wire and forgings
Tensile strength, σb/MPa: 862MPa max.(wire rod)
Yield strength, σ0.2/MPa: -
Elongation, δ(％): -
Reduction of area, ф (％): -
Hardness under annealed condition | HBW: 140 ~ 241 (bars)
Hardness under annealed condition | HBW: 187 Max.(Forgings)
AMS 2241 Torlerance, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire.
ASTM A370 Mechanical Testing of Steel Products.
ASTM E8 - Tension Testing of Metalic Materials.
AMS 2806 Identification, Bars, Wire, Mechanical Tubing and Extrusions, Carbon and Alloy Steels and Corrosion and heat-Resistant Steels and Alloys.
ASTM E353 Chemical Analysis of Stainless Heat-Resisting,Maraging and Other Similar Chromium-Nickel-Iron Alloys
These products have been used typically for parts on which the amount of machining warrants the use of a free-machining grade of steel requiring corrosion resistance similar to the 18-8 type steel, and which will be subjected to high temperatures during facrication or in service.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
Round bar (Diameter): 5.5 to 550mm
Square bar / Flat bar (Thickness X width): 10mm to 550mm
Wire rod (Diameter): 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 220mm
Length: Fixed length or random length or based on the customer's special requirement.
- 10AMS 5645 / S32100 ESR Quality Austenitic Steel
- 61.4938 / X12CrNiMoV12-3 / Z12CNDV12-03 ESR Steel
- 5UNS S42200 | AMS 5655 Martensitic Steel
- 4AMS 5643 & S17400 Martensitic Aged Steel
- 3AMS 5501 / S30400 Cold Rolled Strip, plate, sheet
- 31.4935 / X20CrMoWV12-1 ESR Quality Steel
- 3N07718 - AMS 5662 Nickel Base Austenitic Steel
- 2Free machining Steel AMS 5642 & S34720
- 2AMS 5631 - S44002 Martensitic Stainless Steel
- 2X22CrMoV12-1 | 1.4923 Creep Resisting Steel