AMS 5668 - Inconel X750 alloy Round bar, Plate
2023-01-13 16:03:37 Origin： Remark：0 Click：
Inconel X750 is used typically for parts, bolts, turbine blades, N07750 turbine seals, requiring oxidation resistance and high strength at 1250 to 1500 °F (677 to 816 °C), AMS 5668 cold rolled sheet, plate.
MATERIAL TECHNICAL SPECIFICATION - AMS 5668 & Inconel X750
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5668K
Official Test Report - issued by TUV - SGS - BV
MAIN CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≤ 0.08
Manganese, Mn (％): ≤ 1.00
Silicon, Si (％): ≤ 0.50
Phosphorus, P (％)≤: 0.015
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 14.0 ~ 17.0
Nickel, Ni (％): 70.0 Min.
Molybdenum, Mo (%): -
Niobium, Nb (%): 0.70 ~ 1.20
Titanium, Ti (%): 2.25 ~ 2.75
Aluminum, Al (%): 0.40 ~ 1.00
Coppper, Cu (%): ≤ 0.50
Tantalum, Ta (%): ≤ 0.05
Cobalt, Co (%): ≤ 1.00
Ferrum, Fe (%): 5.00 ~ 9.00
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5668K
Official Test Report - issued by TUV - SGS - BV
MAIN CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≤ 0.08
Manganese, Mn (％): ≤ 1.00
Silicon, Si (％): ≤ 0.50
Phosphorus, P (％)≤: 0.015
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 14.0 ~ 17.0
Nickel, Ni (％): 70.0 Min.
Molybdenum, Mo (%): -
Niobium, Nb (%): 0.70 ~ 1.20
Titanium, Ti (%): 2.25 ~ 2.75
Aluminum, Al (%): 0.40 ~ 1.00
Coppper, Cu (%): ≤ 0.50
Tantalum, Ta (%): ≤ 0.05
Cobalt, Co (%): ≤ 1.00
Ferrum, Fe (%): 5.00 ~ 9.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Heat treatment practice: solution heat treated by heating to 1149 °C ± 14 °C,
Heat treatment practice: solution heat treated by heating to 1149 °C ± 14 °C,
holding at heat for 2 to 4 hours, and cooling in air.
Tensile strength, σb/MPa: 965
Yield strength, σ0.2/MPa: 552
Elongation, δ(％): 8.0
Reduction of area, ф (％): 8.0
Hardness under hot finished condition | HBW: -
Hardness under precipitation heat treatment condition | HBW: 262 ~ 341
AVAILABLE SHAPES & DIMENSIONS
Round bar (Diameter): 5.5 to 500mm
Square bar / Flat bar (Thickness X width): 10 to 610mm
Wire rod (Diameter): 1.0 to 11.0mm
Steel strip: THK0.5 ~ 3.0, width 10 ~ 220mm
Length: fixed length, random length, or based on the customer's special requirement.
Tensile strength, σb/MPa: 965
Yield strength, σ0.2/MPa: 552
Elongation, δ(％): 8.0
Reduction of area, ф (％): 8.0
Hardness under hot finished condition | HBW: -
Hardness under precipitation heat treatment condition | HBW: 262 ~ 341
AVAILABLE SHAPES & DIMENSIONS
Round bar (Diameter): 5.5 to 500mm
Square bar / Flat bar (Thickness X width): 10 to 610mm
Wire rod (Diameter): 1.0 to 11.0mm
Steel strip: THK0.5 ~ 3.0, width 10 ~ 220mm
Length: fixed length, random length, or based on the customer's special requirement.
Hot search：AMS5668 N07750 Inconel X750 round bar plate
Previous page：AMS 5668
Last page：75NiCrMo5-3-3
Total list
Monthly rank
- 4AMS 5643 & S17400 Martensitic Aged Steel
- 3 STS 630 Condition H1150 Martensitic Ageing Steel
- 3N07718 - AMS 5662 Nickel Base Austenitic Steel
- 31.4938 / X12CrNiMoV12-3 / Z12CNDV12-03 ESR Steel
- 3S64152 & Jethete M152 Aerospace Quality Steel
- 2Free machining Steel AMS 5642 & S34720
- 2S34723 Corrosion Resisting Steel
- 2X5CrNiCuNb16-4 & 1.4542 Martensitic Stainless Steel
- 2SAE 51431 Corrosion-resistant Steel
- 2X22CrMoV12-1 | 1.4923 Creep Resisting Steel
