Inconel 686
2017-03-21 15:22:54 Origin： Remark：0 Click：
Technical specifications of ASTM B564-04 Nickel alloy forgings Grade Inconel 686 datasheet,Inconel 686 Chemical composition,Grade Inconel 686 mechanical properties from Steelmaking,ESR melted, Blooming, Forging, Hot rolling, Inconel 686 Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Inconel 686
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Low-barbon-Ni-Cr-Mo-W Alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.010
MATERIAL CATEGORY: Low-barbon-Ni-Cr-Mo-W Alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.010
Si (％): ≤ 0.08
Mn (％): ≤ 0.75
P (％) ≤: 0.040
S (％) ≤: 0.020
Cr (％): 19.0 ~ 23.0
Ni (％): Remainder
Mo (％): 15.0 ~ 17.0
Mn (％): ≤ 0.75
P (％) ≤: 0.040
S (％) ≤: 0.020
Cr (％): 19.0 ~ 23.0
Ni (％): Remainder
Mo (％): 15.0 ~ 17.0
Cu (%): -
Al (%): -
Ti (%): 0.02 ~ 0.25
Nb (%): -
Co (%): -
V (%): -
N (%): -
B (%): -
W (%): 3.00 ~ 4.40
Ta (%): -
Fe (%): 2.0 max.
MECHANICAL PROPERTIES
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 690
Yield strength, σ0.2/≥ MPa: 310
Elonghation, δ ≥(％): 45.0
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Fe (%): 2.0 max.
MECHANICAL PROPERTIES
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 690
Yield strength, σ0.2/≥ MPa: 310
Elonghation, δ ≥(％): 45.0
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
