11X11H2B2MΦ Round bar, Plate, ESR ingot
2024-12-20 13:40:00   Origin：   Remark：0 Click：

MATERIAL DESIGNATION - 11X11H2B2MΦ

Material Category - Heat resisting steel for Turbine blade fabricating

Material Technical standards: ГОСT 5632 -1972

Inventory & Stocklist - Round bar diameter 12 ~ 300mm. ESR ingots
Sheet & Plate: THK 0.5 ~ 6.0 X Width 200 ~ 1000 X L mm

TYPICAL CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): 0.09 ~ 0.13
Silicon, Si (％): ≤ 0.60
Manganese, Mn (％): ≤ 0.60
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 10.5 ~ 12.0
Molybdenum, Mo (％): 0.35 ~ 0.50
Nickel, Ni (%): 1.50 ~ 1.80
Vanadium, V (%): 0.18 ~ 0.30
Tungsten, W (%): 1.60 ~ 2.00
Ferrum, Fe (%): balance

TYPICAL MECHANICAL PROPERTIES
Heat treatment condition: Quenching 1010 ℃ oil cooled, tempering 540 ℃
Tensile strength, Rm ≥ MPa: 980
Yield strength, Rp0.2 ≥ MPa: 835
Elongation, A5 ≥ (％): 10.0
Reduction of area, Z (%): 40.0
Impact, AKv/J ≥: -
Q + T hardness, HBW: 331 ~ 401

Raw Material Stock Available
Custom 450 / GD450 / XM-25 (S45000), 403 ESR, AISI 616 / 422 ESR, B50A365 / 403Cb+
17-4PH / 630, M-152 / 1.4938 / S151D, FV520B / S143 / 1.4594. X22CrMoV12-1, AISI 690 / Refractaloy 26
AISI 615 / S41800, PH13-8 /XM-13 / S13800, 15-5PH / XM-12 (S15500), A-286 AISI 660 / S66286
10705BU, 10705MBU, 10705AJ, S132, S131, S111, S159, S154