FV448 HEAT RESISTANT STEEL
2026-03-23 09:37:00 Origin： Remark：0 Click：
Heat resisting martensitic steel FV448 peeled round bar, rod, plate stock available FV448 cold drawn on industrial machinery producing gas turbine engine parts
MATERIAL DESIGNATION - FV448
Material category: 10.0Cr - 0.9Ni - 0.6Mo - 0.3Nb - 0.18V base alloy steel
Technical standards: BS EN 3890-2002, BS EN 2344-2001, BS EN 3146-2001
Stock available: round bar diam. 50 ~ 180 mm
Special melting process: EF / EAF + VD + ESR / AOD + ESR
Typical chemical elements (mass fraction %)
Carbon, C (％): 0.08 ~ 0.16
Silicon, Si (％): 0.15 ~ 0.60
Manganese, Mn (％): 0.30 ~ 1.20
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 9.80 ~ 11.2
Nickel, Ni (％): 0.60 ~ 1.20
Molybdenum, Mo (％): 0.40 ~ 0.80
Niobium, Nb (%): 0.15 ~ 0.45
Vanadium, V (％): 0.10 ~ 0.25
Nitrogen, N (%): 0.030 ~ 0.075
Typical chemical elements (mass fraction %)
Carbon, C (％): 0.08 ~ 0.16
Silicon, Si (％): 0.15 ~ 0.60
Manganese, Mn (％): 0.30 ~ 1.20
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 9.80 ~ 11.2
Nickel, Ni (％): 0.60 ~ 1.20
Molybdenum, Mo (％): 0.40 ~ 0.80
Niobium, Nb (%): 0.15 ~ 0.45
Vanadium, V (％): 0.10 ~ 0.25
Nitrogen, N (%): 0.030 ~ 0.075
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Heat treatment temperature and cooling: heat treatment
Tensile strength, Rm ≥ MPa: 930 ~ 1130
Yield strength, Rp0.2≥ MPa: 760
Elongation, A5 (%) ≥: 14.0
Hardness ≤ HBW: 288 ~ 331
PRODUCT DESCRIPTION
FV448 alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered.
Tensile strength, Rm ≥ MPa: 930 ~ 1130
Yield strength, Rp0.2≥ MPa: 760
Elongation, A5 (%) ≥: 14.0
Hardness ≤ HBW: 288 ~ 331
PRODUCT DESCRIPTION
FV448 alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered.
PROFILES & DIMENSIONS
Rod / round bar / disc (diameter): 5.5mm to 900 mm
Square bar / flat bar: 8 to 600 mm
Heavy/middle plate via hot rolled: T7 ~ 300 X W20 ~ 1000 X L1000 ~ 6000 mm
Sheet steel via cold rolled: T0.5 ~ 6 X W10 ~ 1000 X L1000 ~ 2000 mm
Forging piece: stepped shafts, other different shapes based on OEM.
Hot search：FV448 round bar flat bar plate available from stock
Previous page：45CrNiMoVA
Last page：最后一页
Total list
Monthly rank
- 14MSRR 6503 - MSRR 6515 martensitic steel bar
- 11AMS 5639 & S30400 Corrosion-Resisting Steel
- 9Free machining Steel AMS 5642 & S34720
- 6FV520B / FV520 MARTENSITIC AGED STEEL
- 640Cr10Si2Mo HEAT RESISTANT STEEL
- 6SAE 30302 / AMS 5636 Corrosion-Resistant Steel
- 6AMS 5763 / S45000 / C-450 Stock Available
- 5AMS 5668 - Inconel X750 alloy Round bar, Plate
- 5Turbine Blade AE961W Aerospace Martensitic Steel
- 4AMS 5501 / S30400 Cold Rolled Strip, plate, sheet