1.7910
2015-12-16 10:07:41 Origin： Remark：0 Click：
Description 1.7910 Round bar, Suppliers 32MnCrMo6-4-3 Inventory, Stocklist 1.7910 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ASTM A681-2004. We also possess the advanced precision machining equipments for catering for your different special requirements.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - Grade 1.7910
MATERIAL TYPE: Hot rolled steel for high strength forging components
CATEGORY: air hardening steel
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.28 ~ 0.36
Si (％): ≤ 0.50
Mn (％): 1.40 ~ 1.80
P (％)≤: 0.025
S (％)≤: 0.040
Cr (%): 0.80 ~ 1.20
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.28 ~ 0.36
Si (％): ≤ 0.50
Mn (％): 1.40 ~ 1.80
P (％)≤: 0.025
S (％)≤: 0.040
Cr (%): 0.80 ~ 1.20
Mo (%): 0.25 ~ 0.34
HEAT TREATMENT PRACTICE
Normalizing temperature /℃: 850~880 air
Quenching temperature /℃: -
Tempering temperature /℃: 500~700 air
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Diameter ≤ /size mm: 50
Mechanical property ≥|σs/MPa: 800
Mechanical property ≥|σb/MPa: 1150
Mechanical property ≥|δ5(%): 12
Mechanical property ≥|AkU /J: 38
Mechanical property ≥|δ5(%): 12
Mechanical property ≥|AkU /J: 38
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / Quenched and Tempered.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / Quenched and Tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft.
Pressure vessel, seamless pipe.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft.
Pressure vessel, seamless pipe.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：1.7910
Previous page：ASTM H41 /T20841
Last page：23MnNiCrMo5-2
