Grade C20
2017-03-15 09:29:09 Origin： Remark：0 Click：
ISO 683/18-1996 type C20 Round bar, flat bar, plate, Grade C20 Steel making, ESR melted, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold machinied
TECHNICAL SPECIFICATION - ISO 683/18-96 Grade C20
TECHNICAL SPECIFICATION: ISO 683/18 - 1996
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Non-alloy hardened structural steel
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.17 ~ 0.23
Si (％): 0.10 ~ 0.40
Mn (％): 0.30 ~ 0.60
P (％) ≤: 0.045
S (％) ≤: 0.045
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed hardness | HBS: 156 max.
Tensile strength,σb/≥ MPa: 400
Annealed hardness | HBS: 156 max.
Tensile strength,σb/≥ MPa: 400
Yield strength, σ0.2/≥ MPa: 270
Elongation, δ ≥(％): 27.0
Impact, ≥J /Akv: -
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied brightly in the annealed condition.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
PRODUCT FORMS AVAILABLE
Round bar (Diameter): 5.50mm to 550mm
Square bar / Flat bar: 3mm to 500mm
Sheet steel via cold rolled: T0.5 - 3.0mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Round bar (Diameter): 5.50mm to 550mm
Square bar / Flat bar: 3mm to 500mm
Sheet steel via cold rolled: T0.5 - 3.0mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
ADVANTAGED STOCKS FOR INTERNATIONAL MARKETS
Die/mold steel
German series: 1.2083, 1.4021, 1.4028, 1.2344, 1.2343, 1.2379, 1.2312, 1.2738, 1.2360, 1.2581、
1.2316, 1.2085, 1.2510, 1.2367, 17CrNiMo6, 34CrNi3Mo, 36CrNiMo8, 718, 718V, WB36.
American series: 420, 410, H13, H13ESR, D2, P20+Ni, P20+S, O1, O2, H10, H11, 4145H, 4340, P91, P92.
Japan-Korea series: SUS420J2, SKD11, SKD61, SKD6, DC53, SKS3, SKS31, SKT4, NAK80, HMD, KP4, KP4M
American series: 420, 410, H13, H13ESR, D2, P20+Ni, P20+S, O1, O2, H10, H11, 4145H, 4340, P91, P92.
Japan-Korea series: SUS420J2, SKD11, SKD61, SKD6, DC53, SKS3, SKS31, SKT4, NAK80, HMD, KP4, KP4M
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our team of qualified production engineers. Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our team of qualified production engineers. Email: sales@ccsteels.com
Previous page：Grade C18
Last page：ASTM A437 Gr.B4D
