Suppliers P265GH Ex-stock, Datasheet P265GH Suppliers, Properties P265GH Forging Bar Plate, P265GH Technical specifications Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.
DIN P265GH - MATERIAL DATA SHEET
MATERIAL CATEGORY High temperature structural steel
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Pressure vessel, seamless pipe
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the softened condition.
Final heat treatment - heat treatment / QT
MATERIAL SPECIFICATIONS - DIN EN 10028-2 (2003), DIN 17755 (1983)
Round bar / flat bar / hollow bar / strip / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
CHEMICAL COMPOSITION ( WEIGHT % )
C (％): ≤ 0.20
Si (％): ≤ 0.40
Mn (％): 0.50 ~ 1.40
P (％)≤: 0.030
S (％)≤: 0.025
Cr (％): ≤ 0.30
Mo (％): ≤ 0.08
Ni (％): ≤ 0.30
Other (％): Cu ≤0.30；Al ≤0.020；Nb ≤0.01；Ti ≤0.03；V ≤0.02
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Heat treatment temperature /℃|annealing / normalizing : 890～950
Heat treatment temperature /℃|quenching: —
Heat treatment temperature /℃|tempering: —
MECHANICAL PROPERTY UNDER HIGH TEMPERATURE
Yield strength σ0.2≥/MPa|200℃: 195
Yield strength σ0.2≥/MPa|300℃: 155
Yield strength σ0.2≥/MPa|350℃: 140
Yield strength σ0.2≥/MPa|400℃: 130
Yield strength σ0.2≥/MPa|450℃: 115
Yield strength σ0.2≥/MPa|500℃: —
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers. Email: firstname.lastname@example.org