1.1167
2020-03-22 11:28:39 Origin： Remark：0 Click：
DIN EN 10083-3 Specification 1.1167 Round bar, plate, flat bar, 1.1167 Forging block, Hot blooming, Hot forging & rolling, Heat treatment.
MATERIAL TECHNICAL DATA SHEET - W-Nr 1.1167
MATERIAL CATEGORY: hardened and tempered steel
MATERIAL SPECIFICATIONS - DIN EN 10083-3 (2006), DIN 17200 (1987)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.32 ~ 0.40
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): 1.20 ~ 1.50
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (％): -
Molybdenum, Mo (％): -
Nickel, Ni (％): -
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): 1.20 ~ 1.50
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (％): -
Molybdenum, Mo (％): -
Nickel, Ni (％): -
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working temperature /℃: 1100～850
Heat treatment temperature /℃| annealing: 650～700
Heat treatment temperature /℃| Normalizing: 850～880
Heat treatment temperature /℃| Quenching: 820～850water, 830 ~ 860oil
Heat treatment temperature /℃| Tempering: 550～660
Hardness after annealing ≤HBS: 217
Heat treatment temperature /℃| annealing: 650～700
Heat treatment temperature /℃| Normalizing: 850～880
Heat treatment temperature /℃| Quenching: 820～850water, 830 ~ 860oil
Heat treatment temperature /℃| Tempering: 550～660
Hardness after annealing ≤HBS: 217
Steel dimension /mm: ≤16
|σb≥/MPa: 930 ~ 1080
|σs≥/MPa: 685
|δ5≥/(%): 9.0
|ψ≥/(%): 35.0
|AKV≥/J: 41
|σb≥/MPa: 930 ~ 1080
|σs≥/MPa: 685
|δ5≥/(%): 9.0
|ψ≥/(%): 35.0
|AKV≥/J: 41
Steel dimension /mm: 17 - 40
|σb≥/MPa: 830 ~ 980
|σs≥/MPa: 590
|δ5≥/(%): 10.0
|σb≥/MPa: 830 ~ 980
|σs≥/MPa: 590
|δ5≥/(%): 10.0
|ψ≥/(%): 40.0
|AKV≥/J: 41
|AKV≥/J: 41
Steel dimension /mm: 41 - 100
|σb≥/MPa: 740 ~ 880
|σs≥/MPa: 540
|δ5≥/(%): 12.0
|ψ≥/(%): 45.0
|AKV≥/J: 48
|σb≥/MPa: 740 ~ 880
|σs≥/MPa: 540
|δ5≥/(%): 12.0
|ψ≥/(%): 45.0
|AKV≥/J: 48
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to Email (sales@ccsteels.com) or call our resident team of qualified production engineers.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 1000mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
Pipes / Tubings: OD30 - 1300 mm, with wall thickness ranging from 15 to 350 mm.
Hot search：1.1167
Total list
Monthly rank
- 18S135
- 1611SMnPb30
- 15NF 20NC11
- 14EN35B
- 141.7380
- 14SCr435
- 13ASTM 1526/G15260
- 13635H15 / 635M15 / En351
- 131.7005
- 13AISI 8645H