2S97
2020-07-13 10:11:40 Origin: Remark:0 Click:
2.5% Ni-Cr-Mo steel 2S97 Forgings, Round bar, Flat bar, Plate S97 ESR Remelting, Hot forging, Hot rolling, Heat treatment, 100% Ultrasonic flaw detection test, Cold working or machined.
MATERIAL TECHNICAL DATASHEET - Grade BS 2S97
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Aircraft "S" series alloy structural steel
TYPE OF STEEL - 2.5% Ni-Cr-Mo steel
MELTING PROCESS - Consumable electrode remelted
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.27 ~ 0.35
Silicon, Si (%): 0.10 ~ 0.35
Manganese, Mn (%): 0.45 ~ 0.70
Phosphorus, P (%)≤: 0.035
Sulfur, S (%)≤: 0.030
Chromium, Cr (%): 0.45 ~ 0.70
Silicon, Si (%): 0.10 ~ 0.35
Manganese, Mn (%): 0.45 ~ 0.70
Phosphorus, P (%)≤: 0.035
Sulfur, S (%)≤: 0.030
Chromium, Cr (%): 0.45 ~ 0.70
Nickel, Ni (%): 2.30 ~ 2.80
Molybdenum, Mo (%): 0.45 ~ 0.65
Molybdenum, Mo (%): 0.45 ~ 0.65
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Heat treatment
Tensile strength σb≥/MPa: 1180~1420
Yield strength σs≥/MPa: 830
Elongation δ5≥(%): 7.0
Yield strength σs≥/MPa: 830
Elongation δ5≥(%): 7.0
Impact, AKV≥/J: -
Hardness HBS: -
Hardness HBS: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft and pressure vessel.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft and pressure vessel.
AVAILABLE DIMENSIONS & FORMS
Round bar / Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search:2S97