60Cr3
2026-05-19 17:20:00 Origin： Remark：0 Click：
DIN EN 10089 specifications 60Cr3 technical data sheet, 60Cr3 round bar stock available, strip, cold drawn rod steelmaking, hot bloomed, forged & rolled, heat treated
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - CNAS
TECHNICAL DATA SHEET - 60Cr3
Material category: hot rolled spring steel
Technical specifications: DIN EN 10089
Typical chemical elements (mass fraction - %)
Carbon, C (％): 0.55 ~ 0.65
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): 0.70 ~ 1.00
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 0.60 ~ 0.90
Molybdenunm, Mo (％): -
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): 0.70 ~ 1.00
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 0.60 ~ 0.90
Molybdenunm, Mo (％): -
Ferrum, Fe (％): remainder.
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Delivery hardness: HBW 248 max.
Tensile strength, ≥ σb / MPa: -
Yield strength, ≥ σs / MPa: -
Elongation, ≥ δ5 (%): -
Reduction of area, ≥ ψ (%): -
Impact strength, ≥ AKv - DVM-V /J: -
Yield strength, ≥ σs / MPa: -
Elongation, ≥ δ5 (%): -
Reduction of area, ≥ ψ (%): -
Impact strength, ≥ AKv - DVM-V /J: -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered.
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered.
PRODUCT PROFILE & DIMENSIONS
Round bar / rod (diameter): 5.5 to 500 mm
Square bar / flat bar: 8 to 600 mm
Length: random length or based on the customer's special requirement.
Round bar / rod (diameter): 5.5 to 500 mm
Square bar / flat bar: 8 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400 X W50 - 1200 X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6 X W100 - 1000 X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3 X W5 - 200 X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6 X W100 - 1000 X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3 X W5 - 200 X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：60Cr3
Previous page：Z5CNU15.05
Last page：1.7177
Total list
Monthly rank
- 171.5752
- 13S15 / 5S15
- 12Austenitic steel S131
- 10S132
- 10EN33 / EN 33
- 1035CrMoA
- 1024CrMo5
- 10AMS 6499
- 920Cr1Mo1VTiB
- 928CrMoNiV4-9