20CrMo1V
2025-07-27 09:36:24 Origin： Remark：0 Click：
YB/T 158 1999 Alloy structure steel bars for steam turbine bolts 20CrMo1V Stock Available Round bar, flat bar, plate 20CrMo1V forge piece
TECHNICAL DATA SHEET - GB 20CrMo1V
MATERIAL CATEGORY - Alloy structure steel bars for steam turbine bolts.
MATERIAL CATEGORY - Alloy structure steel bars for steam turbine bolts.
MATERIAL SPECIFICATIONS - YB/T 158 - 1999
PRODUCT PROFILE & DIMENSIONS
Rod & round bar & disc (diameter): 5.5 ~ 850 mm
Square bar & flat bar: 8 ~ 650 mm
Plate & Sheet: T 8.0 ~ 350 X W 20 ~ 1000 X L mm
Rod & round bar & disc (diameter): 5.5 ~ 850 mm
Square bar & flat bar: 8 ~ 650 mm
Plate & Sheet: T 8.0 ~ 350 X W 20 ~ 1000 X L mm
TYPICAL CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): 0.15 ~ 0.23
Silicon, Si (％): 0.20 ~ 0.60
Manganese, Mn (％): 0.45 ~ 0.85
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 1.00 ~ 1.50
Molybdenum, Mo (％): 0.90 ~ 1.20
Vanadium, V (％): 0.15 ~ 0.30
Niobium, Nb (％): -
Titanium, Ti (％): -
Nickel, Ni (%): ≤ 0.50
Copper, Cu (%): ≤ 0.35
Aluminum, Al (%): ≤ 0.015
Carbon, C (％): 0.15 ~ 0.23
Silicon, Si (％): 0.20 ~ 0.60
Manganese, Mn (％): 0.45 ~ 0.85
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 1.00 ~ 1.50
Molybdenum, Mo (％): 0.90 ~ 1.20
Vanadium, V (％): 0.15 ~ 0.30
Niobium, Nb (％): -
Titanium, Ti (％): -
Nickel, Ni (%): ≤ 0.50
Copper, Cu (%): ≤ 0.35
Aluminum, Al (%): ≤ 0.015
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT
Heat treatment temperature / ℃ | annealing: -.
Heat treatment temperature / ℃ | Normalizing: -
Heat treatment temperature / ℃ | Quenching: 1025 ~ 1080 air cooling
Heat treatment temperature / ℃ | Tempering : 690 ~ 730 air cooling
Hardness after annealing, ≤ HBW: 269
Tensile strength, Rm ≥ MPa: 622
Yield strength, Rp0.2 ≥ MPa: 413
Elongation, A5 ≥ (%): 15.0
Reduction of area, Z ≥ (%): 25.0
Impact strength, AKu ≥ J: -
Hardness after final heat treatment / HBW: 241 max.
Hardness after annealing, ≤ HBW: 269
Tensile strength, Rm ≥ MPa: 622
Yield strength, Rp0.2 ≥ MPa: 413
Elongation, A5 ≥ (%): 15.0
Reduction of area, Z ≥ (%): 25.0
Impact strength, AKu ≥ J: -
Hardness after final heat treatment / HBW: 241 max.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Mechanical parts - connecting rod, bolt and nuts.
Multi-diameter shaft, pressure vessel parts.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, mechanical gears, gear shaft, main axis, valve rod.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Mechanical parts - connecting rod, bolt and nuts.
Multi-diameter shaft, pressure vessel parts.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, mechanical gears, gear shaft, main axis, valve rod.
PRODUCT DESCRIPTION
20CrMo1V is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - Quenched and tempered.
Stock Available: Round bar diam. 20 ~ 180mm.
20CrMo1V is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - Quenched and tempered.
Stock Available: Round bar diam. 20 ~ 180mm.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you are interested in our products or services, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers or sales department.
Hot search：20CrMo1V
Total list
Monthly rank
- 4438NCD4
- 3526NiCrMoV14-5
- 3426NiCrMoV11-5
- 3442Cr4Mo2
- 3424CrMo5
- 3120MnB4 / 1.5525
- 28ASTM A739 type B11
- 2838NiCrMo4
- 27EN52 & EN 52
- 26EN18 / EN 18