42MnV7
2014-10-25 09:31:50 Origin： Remark：0 Click：
Specifications 42MnV7 Round bar Properties Forging Bar Plate Technical Specifications 42MnV7 Melting, ESR & VAR technique, Hot blooming, Hot forging, Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.
ALLOY STEEL TECHNICAL DATA SHEET - Grade DIN 42MnV7
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
MATERIAL CATEGORY - hardened and tempered steel
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - heat treatment / QT
MATERIAL SPECIFICATIONS - DIN EN 10083-2 (2006), DIN 17200 (1987)
CHEMICAL COMPOSITION (Mass weight %)
C (％): 0.38 ~ 0.45
Si (％): 0.15 ~ 0.35
Mn (％): 1.60 ~ 1.90
P (％)≤: 0.035
S (％)≤: 0.035
Cr (％): -
Mo (％): -
Ni (％): -
V (％): 0.07 ~ 0.12
Si (％): 0.15 ~ 0.35
Mn (％): 1.60 ~ 1.90
P (％)≤: 0.035
S (％)≤: 0.035
Cr (％): -
Mo (％): -
Ni (％): -
V (％): 0.07 ~ 0.12
Hot working temperature /℃: 1100～850
Heat treatment temperature /℃| annealing: 640～680
Heat treatment temperature /℃| Normalizing: 860～890
Heat treatment temperature /℃| Quenching: 840～870 Water
Heat treatment temperature /℃| Tempering : 480～650
Hardness after annealing ≤HBS: 217
Heat treatment temperature /℃| annealing: 640～680
Heat treatment temperature /℃| Normalizing: 860～890
Heat treatment temperature /℃| Quenching: 840～870 Water
Heat treatment temperature /℃| Tempering : 480～650
Hardness after annealing ≤HBS: 217
Steel dimension /mm: ≤16
|σb≥/MPa: 980 ~ 1270
|σs≥/MPa: 885
|δ5≥/(%): 10.0
|ψ≥/(%): 30.0
|AKV≥/J: 21
|σb≥/MPa: 980 ~ 1270
|σs≥/MPa: 885
|δ5≥/(%): 10.0
|ψ≥/(%): 30.0
|AKV≥/J: 21
Steel dimension /mm: 17 - 40
|σb≥/MPa: 980 ~ 1180
|σs≥/MPa: 785
|δ5≥/(%): 11.0
|σb≥/MPa: 980 ~ 1180
|σs≥/MPa: 785
|δ5≥/(%): 11.0
|ψ≥/(%): 35.0
|AKV≥/J: 27
|AKV≥/J: 27
Steel dimension /mm: 41 - 100
|σb≥/MPa: 880 ~ 1030
|σs≥/MPa: 685
|δ5≥/(%): 12.0
|ψ≥/(%): 40.0
|AKV≥/J: 34
|σb≥/MPa: 880 ~ 1030
|σs≥/MPa: 685
|δ5≥/(%): 12.0
|ψ≥/(%): 40.0
|AKV≥/J: 34
AVAILABLE SHAPES
Round bar / flat bar / square bar / Steel strip / Sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 10mm to 450mm
Plate / Sheet steel / Steel strip: 1.0 to 500mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to email or call our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：42MnV7
