90CrSi5 Stockist, 90CrSi5 Equivalent Steel
Home > Tool steel > Text

90CrSi5
2014-09-17 09:36:42   Origin:   Remark:0 Click:

Technical specifications of DIN standards cold work alloy tool steels 90CrSi5 data sheet, 90CrSi5 Chemical compositions, 90CrSi5 Mechanical properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specifications - ISO 4597 - 2001. We also possess the advanced precision machining equipments for catering for your different special requirements.
 
DIN 90CrSi5 % W-Nr 1.2108 - DATA SHEET

Material category:  Cold work alloy tool steel 
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutting tools
Mechanical parts  
Air hammer tools
Piercing tools
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the softened condition.
Final heat treatment - heat treatment / QT.
MATERIAL SPECIFICATIONS  
EN ISO 4957: 2000 , DIN 17350 (1980)
AVAILABLE SHAPES  
Black bar /Flat bar /Square bar 
Bright - peeled + polishing /centerless grinding / peeled + slidabrading
Forged - ring /tube  /pipe casing /discs /shaft

CHEMICAL COMPOSITION (WEIGHT %) - DIN 90CrSi5 / W-Nr 1.2108
C (%):     0.85 ~ 0.95
Si (%):    1.05 ~ 1.25
Mn (%):   0.60 ~ 0.80
P (%)≤:   0.035
S (%)≤:   0.035
Cr (%):    1.10 ~ 1.30
Mo (%):    —
V (%):    — 
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working tenperature /℃:  1050~850
Annealing temperature /℃:     710~740
Hardness after annealing ≤HBW:  230
Quenching temperature /℃:    830~850
Cooling medium: water / oil
Common tempering temperature /℃:  180~250
Hardness after tempering at temperature HRC|100℃:    65
Hardness after tempering at temperature HRC|200℃:    62
Hardness after tempering at temperature HRC|300℃:    58
Hardness after temper
ing at temperature HRC|400℃:    54
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers. E-mail: sales@ccsteels.com

PRODUCT PROFILE  
Round bar / Wire rod (Diameter): 5.50mm to 700mm
Square bar / Flat bar: 10mm to 700mm
Plate / Sheet steel / Steel strip: 0.5mm to 1200mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm. 

Hot search:90CrSi5

Previous page:1.2103
Last page:1.2108

Share to: