45NCD16 Stockist, 45NCD16 Equivalent Datasheet
Home > Tool steel > Text

45NCD16
2017-03-11 15:11:13   Origin:   Remark:0 Click:

Technical specifications of AFNOR 45NCD16 cold work alloy tool steel 45NCM16 data sheet, AFNOR 45NCD16 Chemical compositions, 45NCD16 Mechanical properties from Steelmaking, ESR melted, Blooming, Hot forging, 45NCD16 Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specifications - ISO 4597 - 2001. We also possess the advanced precision machining equipments for catering for your different special requirements.
Technical Data Sheet - AFNOR 45NCD16

OFFICIAL TEST REPORT: issued by TUV - SGS BV
MATERIAL CATEGORY:  Cold work alloy tool steel
CHEMICAL COMPOSITION (WEIGHT - %)
C (%):     0.40 ~ 0.50
Si (%):     0.10 ~ 0.40
Mn (%):   0.20 ~ 0.50

P (%)≤:   0.030
S (%)≤:   0.030
Cr (%):    1.20 ~ 1.50
Mo (%):    0.15 ~ 0.35
Ni (%):     3.80 ~ 4.30
HEAT TREATMENT PRACTICE AND HARDNESS
Hot working tenperature ℃ /Starting: 1050
Hot working tenperature ℃ /Ending: 850
Annealing temperature ℃: 610 ~ 650
Hardness after annealing ≤HBW: 260
Quenching temperature ℃: 840 ~ 870
Cooling medium: Air or oil cooled
Tempering temperature ℃: 150 ~ 250
Hardness value after tempered /≥ HRC: 46 ~ 56

MELTING PROCESS 
This alloy is generally smelt in electric arc furnace  (EAF ) or IFF + VD, LF + Electroslag remelting (ESR).
For a purpose of higher quality, it should be smelt via technology of vacuum refining.
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutlery for medical equipments
Cutting tools
Mechanical parts 
Air hammer tools
Piercing tools
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.  

TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
- Email us:
lh.steel@hotmail.com

Hot search:45NCD16

Previous page:18X3MB
Last page:45X2N4MA / AISI 6F7

Share to: