35NCDV8 datasheet,35NCDV8 chemical,35NCDV8 heat treatment
Home > Tool steel > Text

35NCDV8
2021-11-03 11:02:13   Origin:   Remark:0 Click:

Specifications 35NCDV8 Data sheet, Inventory 35NCDV8 Chemical, Stocklist 35NCDV8 Properties from Steel melting, ESR melted, Blooming, Hot forging / Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specifications - NF A35-590 1992. We also possess the advanced precision machining equipments for catering for your different special requirements.
TECHNICAL SPECIFICATIONS DATASHEET - Grade 35NCDV8

OFFICIAL TEST REPORT: issued by TUV - SGS  BV
MATERIAL CATEGORY - hot work alloy 
tool steel
MATERIAL SPECIFICATIONS - NF A35-590 1992
MELTING PROCESS - EAF + AOD / + ESR
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION ( MASS WEIGHT - % )
C (%):      0.32 ~ 0.38
Si (%):      0.1
0 ~ 0.40
Mn (%):    0.30 ~ 0.60
P (%)≤:    0.030
S (%)≤:    0.030
Cr (%):     1.90 ~ 2.30
Mo (%):    0.50 ~ 0.80
Ni (%):     2.00 ~ 2.40
V (%):      0.05 ~ 0.15
TECHNICAL SPECIFICATIONS FOR HOT WORK ALLOY TOOL STEEL
Hardness after annealing ≤HBW: 241
Quenching temperature ℃: 850
Cooling medium: Oil cooled
Tempering temperature ℃: 500
Hardness value after tempered /≥ HRC: 42
HOT WORKING AND HEAT TREATMENT OF HOT WORK ALLOY TOOL STEEL
Hot working temperature ℃: 1050 ~ 850
Full annealing temperature ℃: 630~670
Quenching temperature ℃: 850~880
Cooling medium: air / oil
MELTING PROCESS 
This 
alloy is generally smelt in electric arc furnace  (EAF ) or IFF + VD, LF + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining.
TYPICAL APPLICATIONS
Alloy 
tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutlery for medical equipments
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM. 
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. Email: 
sales@ccsteels.com.

Hot search:35NCDV8

Previous page:1.2346
Last page:最后一页

Share to: