X33CrS16 datasheet,X33CrS16 chemical,X33CrS16 heat treatment
Home > Tool steel > Text

X33CrS16
2014-09-12 14:28:09   Origin:   Remark:0 Click:

Plate X33CrS16 Inventory, Flat bars X33CrS16 Stock list, Forgings X33CrS16 machined, 1.2085 Alloy Exporters - Technical standards - EN ISO 4957: 2000 or by agreement.
ALLOY TOOL STEEL  DATASHEET - DIN X33CrS16
MATERIAL CATEGORY - Cold work alloy tool steel 
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements.
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutting tools, Mechanical parts, Air hammer tools, Piercing tools.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the softened condition.
Final heat treatment - heat treatment / QT 
MATERIAL SPECIFICATIONS - EN ISO 4957: 2000 , DIN 17350 (1980)
AVAILABLE SHAPES
Round bar / flat bar / square bar / plate / forge piece 
Bright - peeled + polishing, centerless grinding
Forged - ring /tube  /pipe casing /discs /shaft
CHEMICAL COMPOSITION (Mass weight - %)
C (%):     0.28 ~ 0.38
Si (%):    ≤ 1.00
Mn (%):   ≤ 1.00
P (%)≤:   0.030
S (%)≤:   0.05 ~ 0.10
Cr (%):    15.0 ~ 17.0
Mo (%):   -
V (%):     -
Other (%): Ni ≤ 1.00 
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working tenperature /℃: 1100~800
Annealing temperature /℃:  850~880
Hardness after annealing ≤HBW: 230
Quenching temperature /℃:  1000~1050
Cooling medium: water / oil
Common tempering temperature /℃:  -
Hardness after tempering at temperature HRC|100℃:    48
Hardness after tempering at temperature HRC|200℃:    48
Hardness after tempering at temperature HRC|300℃:    47
Hardness after tempering at temperature HRC|400℃:    46
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to email or call our resident team of qualified production engineers. E-mail: sales@ccsteels.com

Hot search:X33CrS16

Previous page:1.2083
Last page:1.2085

Share to: