Aquamet 22 Forging
2020-03-12 11:29:15 Origin: Remark:0 Click:
Specifications Aquamet 22 Ex-stock, Alloy Aquamet 22 Suppliers, Properties Aquamet 22 Forging Bar Plate, Grade Aquamet 22 Technical Specifications Melting, ESR & VAR technique, Hot blooming, Hot forging, Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.
Alloy DATA SHEET - Aquamet 22
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Special alloys
CHEMICAL COMPOSITION (WEIGHT %)
C (%): ≤ 0.06
Si (%): ≤ 1.00
Mn (%): 4.00 ~ 6.00
P (%)≤: 0.040
S (%)≤: 0.030
Cr (%): 20.5 ~ 23.5
Ni (%): 11.5 ~ 13.5
Mo (%): 1.50 ~ 3.00
Co (%): -
Mo (%): 1.50 ~ 3.00
Co (%): -
W (%): -
Al (%): -
Nb (%): 0.10 ~ 0.30
Ti (%): -
N (%): 0.20 ~ 0.40
Al (%): -
Nb (%): 0.10 ~ 0.30
Ti (%): -
N (%): 0.20 ~ 0.40
V (%): 0.10 ~ 0.30
Fe (%): Remainder
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 690
Yield strength, σ0.2/≥ MPa: 380
Elonghation, δ ≥(%): 18.0
Reduction of area, ф ≥ (%): 45.0
Hardness | HB:
FORMS AND SHAPES
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 500mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Yield strength, σ0.2/≥ MPa: 380
Elonghation, δ ≥(%): 18.0
Reduction of area, ф ≥ (%): 45.0
Hardness | HB:
FORMS AND SHAPES
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 500mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Previous page:Aquamet 22
Last page:STR 37