Home > Speciality > Text

1.4938 & X12CrNiMoV12-3 Turbine blade steels
2026-07-13 08:45:00 Origin： Remark：0 Click：

Creep-resisting steel 1.4938 heat treated round bar, milled flat bar, ESR Ingot X12CrNiMoV12 Turbine blade steel, quenched and tempered condition manufacturing

TECHNICAL DATA SHEET - X12CrNiMoV12-3 & 1.4938

Stock & inventory for sale: round bar 40 ~ 210 mm, flat bar, ESR ingot

MATERIAL SPECIFICATIONS - DIN EN 10302, 10095, EN 10088-1

Raw material stock available (ESR ingot, round bar, flat bar, plate)

Custom 450 / GD450 / XM-25 (S45000), 403 ESR, AISI 616 / 422 ESR, B50A365 / 403Cb+

17-4PH / 630, M-152 / 1.4938 / S151D, FV520B / S143 / 1.4594. X22CrMoV12-1, AISI 690 / Refractaloy 26
AISI 615 / S41800, PH13-8 /XM-13 / S13800, 15-5PH / XM-12 (S15500), A-286 AISI 660 / S66286
10705BU, 10705MBU, 10705AJ, S132, S131, S111, S159, S154

TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 0.40 ~ 0.90
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.015

Chromium, Cr (％): 11.0 ~ 12.5

Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (％): 1.50 ~ 2.00

Nitrogen, N (%): 0.020 ~ 0.040

Aluminum, Al (%): -

Vanadium, V (％): 0.25 ~ 0.40

Martensitic steel - Chromium content is 10～13%, which holds superior high temperature strength, inoxidizability and moisture corrosive resistance,but weldability is not good. 4Cr9Si2, 4Cr10Si2Mo are used to make the vent valves of internal combustion engine, also belong to Martensitic steel.

Hot search：1.4938 X12CrNiMoV12-3 turbine blade steel

Previous page：EN 10088-1 Grade 1.4938
Last page：15Ni5Cr4Mo1

Share to：

1.4938 & X12CrNiMoV12-3 Turbine blade steels
2026-07-13 08:45:00 Origin： Remark：0 Click：

Total list

Monthly rank

1.4938 & X12CrNiMoV12-3 Turbine blade steels 2026-07-13 08:45:00 Origin： Remark：0 Click：

Extend reading：

Total list

Monthly rank

1.4938 & X12CrNiMoV12-3 Turbine blade steels
2026-07-13 08:45:00 Origin： Remark：0 Click：