14NCD6
2025-12-29 09:51:00 Origin： Remark：0 Click：
Technical specifications structure steel 14NCD6 high tensile steel round bar, flat bar, plate, cold drawn rod, steelmaking, ESR melted, hot bloomed, forged, rolled, heat treated
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - 14NCD6
Material category: Ni1.4 - Cr1.0 - Mo0.25 structure steel
Typical chemical compositions (mass weight %)
Carbon, C (％): 0.10 ~ 0.16
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.60 ~ 0.90
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.035
Chromium, Cr (％): 0.85 ~ 1.15
Nickel, Ni (％): 1.20 ~ 1.60
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.60 ~ 0.90
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.035
Chromium, Cr (％): 0.85 ~ 1.15
Nickel, Ni (％): 1.20 ~ 1.60
Molybdenum, Mo (%): 0.15 ~ 0.30
Ferrum, Fe (％): balance.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb / MPa ≥: 980 ~ 1270
Yield strength, σs / MPa ≥: 685
Elongation, A5 (％) ≥: 8.0
Yield strength, σs / MPa ≥: 685
Elongation, A5 (％) ≥: 8.0
Delivery hardness, HB ≥: -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft.
Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.- Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.- Email: sales@ccsteels.com
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 6.0 to 850 mm
Square bar / flat bar: 10 to 600 mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / rod / disc (diameter): 6.0 to 850 mm
Square bar / flat bar: 10 to 600 mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 200 X W20 ~ 1500 X L1000 - 12000 mm
Sheet steel via cold rolled: T0.5 ~ 6 X W60 ~ 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.3 ~ 3 X W10 ~ 200 X L mm (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Steel strip via cold rolled: T0.3 ~ 3 X W10 ~ 200 X L mm (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Hot search：14NCD6
Total list
Monthly rank
- 18S135
- 1611SMnPb30
- 15NF 20NC11
- 14EN35B
- 141.7380
- 14SCr435
- 13ASTM 1526/G15260
- 13635H15 / 635M15 / En351
- 131.7005
- 13AISI 8645H