2015-08-26 20:28:15 Origin： Remark： Click：
Description 28CDV5 Equivalents, Inventory 28CDV5 Round bar, Ex-stock 28CDV5 Plate Property from Steelmaking, ESR melted, Hot looming, Hot forging, Hot rolling, Heat treated, Straightening, Ultrasonic test, Cold working or Machined. We also possess the advanced precision machining equipments for further processing, just let us know what you inquire.
Official Test Certificate: issued by TUV - SGS - BV
MATERIAL TECHNICAL DATASHEET - Grade NF 28CDV5
MATERIAL CATEGORY - French inactive standard structure steel
MELTING PROCESS - EAF / BEF / + ESR
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
Official Test Certificate - issued by TUV - SGS - BV
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.25 ~ 0.30
Si (％): ≤ 0.60
Mn (％): ≤ 0.80
P (％)≤: 0.040
S (％)≤: 0.035
Cr (％): 1.00 ~ 1.50
Ni (％): -
Mo (%): 0.60 ~ 0.80
V (％): 0.25 ~ 0.35
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength / σb/MPa|≥: 690 ~ 850
Yield strength / σs/MPa|≥: 550
Elongation / 5(％)|≥: 15.0
Delivery hardness /HBW|≥: 205 ~ 250
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
Round bar / flat bar / hollow bar / plate / ring
Bright - peeled + polishing, centerless grinding
Forged - ring, discs, shaft
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft, Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Emal: firstname.lastname@example.org