30NCD12
2015-08-29 16:31:36 Origin： Remark：0 Click：
Description 30NCD12 Round bar, flat bar, and forging pieces, 30NCD12 Stocklist Specifications from Steelmaking,ESR melted,Blooming, Hot forging, Hot rolling, Heat treated, Straightening, Ultrasonic test, Cold working or Machined.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade NF 30NCD12
MATERIAL CATEGORY - French inactive standard structure steel
CHEMICAL COMPOSITION (Mass weight %)
C (％): 0.25 ~ 0.35
Si (％): 0.10 ~ 0.40
Si (％): 0.10 ~ 0.40
Mn (％): 0.15 ~ 0.55
P (％)≤: 0.030
S (％)≤: 0.025
Cr (％): 0.70 ~ 1.10
Ni (％): 2.80 ~ 3.30
P (％)≤: 0.030
S (％)≤: 0.025
Cr (％): 0.70 ~ 1.10
Ni (％): 2.80 ~ 3.30
Mo (%): 0.25 ~ 0.45
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength / σb/MPa|≥: 1080 ~ 1320
Yield strength / σs/MPa|≥: 885
Elongation / 5(％)|≥: 9.0
Yield strength / σs/MPa|≥: 885
Elongation / 5(％)|≥: 9.0
Delivery hardness /HBS|≥: -
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
AVAILABLE SHAPES
Round bar / flat bar / hollow bar / strip / sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, discs, shaft
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
Hot search：30NCD12
