32CDV13
2015-09-12 08:32:34 Origin： Remark：0 Click：
Steel Specifications 32CDV13 Round bar, flat bar, Forgings Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Ultrasonic test, Cold working or machined.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - NF 32CDV13
MATERIAL CATEGORY - French inactive standard structure steel
HS CODE for Customs - 7224000 / 72285000
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.29 ~ 0.36
Silicon, Si (％): 0.10 ~ 0.40
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.40 ~ 0.70
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.020
Chromium, Cr (％): 2.80 ~ 3.30
Nickel, Ni (％): ≤ 0.30
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.020
Chromium, Cr (％): 2.80 ~ 3.30
Nickel, Ni (％): ≤ 0.30
Molybdenum, Mo (%): 0.70 ~ 1.20
Vanadiu, V (％): 0.15 ~ 0.35
MECHANICAL PROPERTIS - ( Q + T HEAT TREATMENT)
Quenched Temp.: 950 ℃
Tempered ≥640 ℃
Tensile strength / σb/MPa|≥: 950~1100
Yield strength / σs/MPa|≥: 735
Elongation / 5(％)|≥: 14
Yield strength / σs/MPa|≥: 735
Elongation / 5(％)|≥: 14
Delivery hardness /HBS|≥: -
Tempered ≥620 ℃
Tensile strength / σb/MPa|≥: 1080~1280
Yield strength / σs/MPa|≥: 855
Elongation / 5(％)|≥: 12.0
Yield strength / σs/MPa|≥: 855
Elongation / 5(％)|≥: 12.0
Delivery hardness /HBS|≥: -
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolts and nuts, Multidiameter shaft, Pressure vessel.
PROFILE & DIMENSIONS
Round bar / Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 300mm X W70 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 500mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 500mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Hot search：32CDV13
