32CDV13 ESR
2026-02-27 16:55:00 Origin： Remark：0 Click：
Technical specifications of 32CDV13 ESR melted, round bar, flat bar, forgings 32CDV13 hot rolled, heat treated, straightening, 100% UT
Official test certificate: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - AIR9160 type 32CDV13
Material category: high tensile strength structure steel
Typical chemical elements (mass fraction %)
Carbon, C (％): 0.29 ~ 0.36
Silicon, Si (％): 0.10 ~ 0.40
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.40 ~ 0.70
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 2.80 ~ 3.30
Nickel, Ni (％): ≤ 0.30
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 2.80 ~ 3.30
Nickel, Ni (％): ≤ 0.30
Molybdenum, Mo (%): 0.70 ~ 1.20
Vanadium, V (％): 0.15 ~ 0.35
MECHANICAL PROPERTIS - ( Q + T HEAT TREATMENT)
Quenched Temp.: 950 ℃
Tempered Temp.: 640 ℃ min.
Tensile strength / σb / MPa ≥: 950~1100
Yield strength / σs / MPa ≥: 735
Elongation / A5 (％) ≥: 14.0
Yield strength / σs / MPa ≥: 735
Elongation / A5 (％) ≥: 14.0
Delivery hardness / HBS ≥: -
Tempered: 620 ℃ Min.
Tensile strength / σb / MPa ≥: 1080~1280
Yield strength / σs / MPa ≥: 855
Elongation / Z (％) ≥: 12.0
Yield strength / σs / MPa ≥: 855
Elongation / Z (％) ≥: 12.0
Delivery hardness /HBS|≥: -
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft.
Pressure vessel, seamless pipe.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
PRODUCT PROFILE & DIMENSIONS
Round bar / Disc (diameter): 6.0 to 650 mm
Square bar / Flat bar: 3mm to 800 mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter): 6.0 to 650 mm
Square bar / Flat bar: 3mm to 800 mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.3 ~ 3 X W15 ~ 200 X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Forging piece: stepped shafts, and other different shapes based on OEM.
Total list
Monthly rank
- 18S135
- 1611SMnPb30
- 15NF 20NC11
- 14EN35B
- 141.7380
- 14SCr435
- 13ASTM 1526/G15260
- 13635H15 / 635M15 / En351
- 131.7005
- 13AISI 8645H