42CD4 Stockist, 42CD4 Equivalent Steel

42CD4
2024-11-08 08:36:00   Origin:   Remark:0 Click:

NF A36-102 Material Specification 42CD4 Hot tandem rolling steel coil, plate 42CD4 ESR melted, Hot Forging, Hot rolling, Heat treatment
 
Official Test Certificate: issued by TUV - SGS -  BV

TECHNICAL DATA SHEET - 42CD4
MATERIAL STANDARDS - NF A36-102
MATERIAL CATEGORY - Hot tandem rolling steel strip 
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (%):  0.38 ~ 0.45
Silicon, Si (%):  0.15 ~ 0.40
Manganese, Mn (%):  0.60 ~ 0.90
Phosphorus, P (%)≤:  0.025
Sulfur, S (%)≤:  0.020
Chromium, Cr (%):  0.90 ~ 1.20
Molybdenum, Mo (%):  0.15 ~ 0.30
Nickel, Ni (%):  ≤ 0.20
 
MECHANICAL PROPERTIES UNDER ROOM TEMP. 
Tensile strength, Rm / MPa ≥: 1080
Yield strength, Rp0.2 / MPa ≥: 930
Elongation, A5 (%) ≥: 12.0
Delivery hardness /HBS|≥: 217
 
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially. The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched + tempered. 
 
PROFILE AND DIMENSION
Round bar / rod / disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
 
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on. 
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners,
Mechanical gears, gear shaft, .main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft. Pressure vessel.
 
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.

Hot search:42CD4

Previous page:35B3
Last page:55S7

Share to: