23MNCD5
2025-12-26 09:58:00 Origin： Remark：0 Click：
technical specification NF A35-566 anchor chain steel 23MNCD5 peeled round bar, flat bar, stock rod properties steelmaking, ESR melted, hot bloomed, forged, rolled, heat treated
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - 23MNCD5
Material type: anchor chain steel
Technical specifications: NF A35-566
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.20 ~ 0.26
Silicon, Si (％): 0.10 ~ 0.35
Silicon, Si (％): 0.10 ~ 0.35
Manganese, Mn (％): 1.10 ~ 1.40
Phosphorus, P (％): ≤ 0.030
Sulfur, S (％): ≤ 0.025
Phosphorus, P (％): ≤ 0.030
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): 0.40 ~ 0.60
Nickel, Ni (%): 0.40 ~ 0.70
Molybdenum, Mo (%): 0.20 ~ 0.30
Aluminum, Al (％): ≥ 0.020
Aluminum, Al (％): ≥ 0.020
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 1180
Yield strength, Rp0.2 ≥ MPa: 985
Elongation, A5 ≥ (%): 9.0
Yield strength, Rp0.2 ≥ MPa: 985
Elongation, A5 ≥ (%): 9.0
Reduction of area, ψ (％) ≥: -
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD + LF, EF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rod, bolt and nut, multidiameter shafts.
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Round bar / rod / disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400 X W50 ~ 1000 X L1000 ~ 5000 mm
Sheet steel via cold rolled: T0.5 ~ 6 X W10 - 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.3 ~ 3 X W5 - 200 X L mm (in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 ~ 6 X W10 - 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.3 ~ 3 X W5 - 200 X L mm (in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search：23MNCD5
Total list
Monthly rank
- 60S132
- 2626NiCrMoV14-5
- 2538B3
- 2334CrNiMo6V
- 2230Mn5
- 22EN33 / EN 33
- 2016CrMo4
- 19ASTM A739 type B11
- 1832CrMoV13
- 1820MnB4 / 1.5525