35NCD16
2015-11-07 09:58:26 Origin： Remark：0 Click：
Steel 35NCD16 is a 3.8% Nickel - 1.8% Chromium - 0.35% Molybdenum Base high tensile steel, 35NCD16 Round bar, Flat bar, Forgings, ESR melted, Heat treated.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATASHEET - Grade NF 35NCD16
MATERIAL TYPE - Spring steel Stock on hand Round bar diameter 55mm / 65mm / 100mm / 130mm
MATERIAL STANDARDS - NF A36 - 571
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.32 ~ 0.39
Silicon, Si (％): 0.10 ~ 0.40
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Chromium, Cr (%): 1.60 ~ 2.00
Molybdenum, Mo (%): 0.25 ~ 0.45
Nickel, Ni (％): 3.60 ~ 4.10
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 950 ~ 1150
Yield strength σs≥/MPa: 750
Yield strength σs≥/MPa: 750
Elongation δ5 ≥(%): 11.0
Reduction of area ψ(％) ≥: -
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD /LF + IFF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shafts.
FORMS & DIMENSIONS
Round bar / Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 400mm X L
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 400mm X L
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：35NCD16
