2015-11-08 10:44:03 Origin： Remark： Click：
Spring steel 45SiCrMo6 Datasheet, 45SiCrMo6 Chemical, 45SiCrMo6 Property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Straightening, Ultrasonic test, Cold working or Machined. Technical specification - NF A36-571.We also possess the advanced precision machining equipments for further processing. Please just let us know what you inquire.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - NF 45SiCrMo6
MATERIAL TYPE - Spring steel
MATERIAL STANDARDS - NF A36-571
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.42 ~ 0.50
Si (％): 1.30 ~ 1.70
Mn (％): 0.50 ~ 0.80
P (％)≤: 0.025
S (％)≤: 0.025
Cr (%): 0.50 ~ 0.75
Mo (%): 0.20 ~ 0.30
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 1550~1850
Yield strength σs≥/MPa: 1400
Elongation δ5 ≥(%): 6.0
Reduction of area ψ(％) ≥: -
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF + VD /LF + IFF + VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
Round bar / flat bar / strip / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, discs, shaft
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rod, bolt and nut
PRODUCT PROFILE AND DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 300mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T1.0 - 6mm X W10 - 300mm X L
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer. E-mail: email@example.com.