34CrAlNi7 Stockist, 34CrAlNi7 Equivalent Steel

34CrAlNi7
2015-11-17 13:23:01   Origin:   Remark:0 Click:

Technical specifications of French standards case hardening steel 34CrAlNi7 datasheet, NF 34CrAlNi7 Chemical compositions, mechanical properties from Steelmaking, ESR melted, Blooming, 34CrAlNi7 Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. Technical specification - NF EN 10085.We also possess the advanced precision machining equipments for further processing. Please just let us know what you inquire.
 
 
Official Test Certificate: issued by TUV - SGS -  BV

TECHNICAL SPECIFICATION / DATASHEET -  NF 34CrAlNi7
MATERIAL TYPE: Case hardening steel
MATERIAL STANDARDS: NF EN 10085
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     0.30~0.37
Si (%):    ≤0.40
Mn (%):   0.40~0.70
P (%)≤:   0.025
S (%)≤:   0.035
Cr (%):     1.50~1.80
Ni (%):     0.85~1.15
Mo (%):    0.15~0.25
Other(%):  Al 0.80~1.20
MECHANICAL PROPERTIES
Tensile strength σb≥/MPa:    1050
Yield strength σs≥/MPa:        650
Elongation δ5 ≥(%):              13
Reduction of area  ψ(%) ≥:   -
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF + VD /LF + IFF + VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT 
Forged - ring, discs, shaft
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on. 
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rod, bolt and nut
Multidiameter shafts
PRODUCT PROFILE
Round bar / Wire rod (Diameter):  0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.  

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
- Email:
lh.steel@hotmail.com

Hot search:34CrAlNi7

Previous page:35NiCr6
Last page:C10E / XC10

Share to: