32NiCrMo12-5 ESR
2025-11-12 12:03:00 Origin： Remark：0 Click：
High tensile strength alloy steel 32NiCrMo12-5 heat treated peeled round bar, flat bar, plate, ESR ingot Steelmaking, hot bloomed, forged / rolled, cold drawn
TECHNICAL DATA SHEET - 32NiCrMo12-5 ESR
Material category: high-tensile alloy structural steel
Official test report: issued by TUV - SGS - BV
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.27 ~ 0.36
Material category: high-tensile alloy structural steel
Official test report: issued by TUV - SGS - BV
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.27 ~ 0.36
Silicon, Si (%): ≤ 0.40
Manganese, Mn (％): 0.25 ~ 0.65
Manganese, Mn (％): 0.25 ~ 0.65
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): 0.90 ~ 1.50
Molybdenum, Mo (%): 0.25 ~ 0.40
Nickel, Ni (%): 2.25 ~ 3.50
MECHANICAL PROPERTY UNDER ROOM-TEMPERATURE
Condition: Quenching and tempering treated
Tensile strength, σb ≥ MPa: 930 ~ 1130
Yield strength, σ0.2 ≥ MPa: 735
Elongation, δ5 ≥ (％): 13.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: 335
Yield strength, σ0.2 ≥ MPa: 735
Elongation, δ5 ≥ (％): 13.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: 335
PRODUCT PROFILE AND DIMENSION
Round bar / rod / disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 8 to 600 mm
Length: random length, based on the customer's special requirement.
Steel strip: T0.50 ~ 3 X W10 ~ 300 X Coil
Heavy/middle plate via hot rolled: T60 - 400 X W60 - 1000 X L1000 - 5000mm
Forging piece: stepped shafts, other different shapes based on OEM requirement.
Round bar / rod / disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 8 to 600 mm
Length: random length, based on the customer's special requirement.
Steel strip: T0.50 ~ 3 X W10 ~ 300 X Coil
Heavy/middle plate via hot rolled: T60 - 400 X W60 - 1000 X L1000 - 5000mm
Forging piece: stepped shafts, other different shapes based on OEM requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：32NiCrMo12-5 ESR
Previous page：30NiCrMo12
Last page：4140H / H41400
Total list
Monthly rank
- 18S135
- 1611SMnPb30
- 15NF 20NC11
- 14EN35B
- 141.7380
- 14SCr435
- 13ASTM 1526/G15260
- 13635H15 / 635M15 / En351
- 131.7005
- 13AISI 8645H