AIR9160C Gr.35CD4
2016-12-14 10:55:05 Origin： Remark：0 Click：
DGA - AIR 9160/C of Steel 35CD4 Round bar, Stocklist 35CD4 Forgings ESR melted, Blooming, Hot forging, Grade 35CD4 Hot rolling, Heat treatment, 100% Ultrasonic test.
TECHNICAL SPECIFICATION - AIR 9160C Grade 35CD4
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL CATEGORY: Low alloy structural steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.30 ~ 0.37
Silicon, Si (％): 0.15 ~ 0.40
Manganese, Mn (％): 0.50 ~ 0.80
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (%): 0.90 ~ 1.20
Molybdenum, Mo (%): 0.15 ~ 0.30
Nickel, Ni (%): ≤ 0.40
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 1080 ~ 1280
Yield strength, σ0.2/≥ MPa: 930
Elongation, δ ≥(％): 10.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 324 ~ 378
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 1080 ~ 1280
Yield strength, σ0.2/≥ MPa: 930
Elongation, δ ≥(％): 10.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 324 ~ 378
Quenching, 850,+/-10 Deg. tempering 550, +/-5 Deg
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 500mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 500mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Previous page：TOCT 4543 30XH3A
Last page：A866 Grade 1050
