32CrMoV12-10
2017-03-04 09:33:44 Origin： Remark：0 Click：
DIN EN 10263-4 Material Specifications High Tensile Steel 32CrMoV12-10, Round bar, flat bar, and forgings, 32CrMoV12-10 ESR, heat treatment
MATERIAL SPECIFICATION - Grade DIN 32CrMoV12-10
Official Test Certificate: issued by TUV - SGS - BV
MATERIAL CATEGORY: High tensile strength structure steel
MATERIAL SPECIFICATIONS: DIN EN 10263-4
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.30 ~ 0.35
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): ≤ 0.60
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 2.80 ~ 3.20
Molybdenum, Mo (％): 0.80 ~ 1.20
Nickel, Ni (％): ≤ 0.25
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): ≤ 0.60
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 2.80 ~ 3.20
Molybdenum, Mo (％): 0.80 ~ 1.20
Nickel, Ni (％): ≤ 0.25
Vanadium, V (%): 0.25 ~ 0.35
Copper, Cu (％): ≤ 0.20
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength, ≥|σb/MPa: 930 - 1100
Yeild strength, ≥|σs/MPa: 760
Elongation, ≥|δ5(％): 15.0
Reduction of area, ≥|ψ(％): -
Yeild strength, ≥|σs/MPa: 760
Elongation, ≥|δ5(％): 15.0
Reduction of area, ≥|ψ(％): -
Impact strength, ≥ AKV DVM-V form sampling /J: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft, Pressure vessel.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Sheet / plate via cold / hot rolled: T0.5 - 6mm X W60 - 600mm X L1000 - 4000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail sales@ccsteels.com
Hot search：32CrMoV12-10
Previous page：Hastelloy G-35
Last page：SKS7M
Total list
Monthly rank
- 3421CrMoV5-11
- 3134CrNiMo6V
- 3016NC6
- 2726NiCrMoV14-5
- 2720NCD2
- 25AISI/SAE 6140
- 23B5F5B
- 2134CrNiMo4
- 2123MnB4 / 1.5535
- 2018MND5
