C50E
2017-08-09 09:05:35 Origin： Remark：0 Click：
Specification of EN Standard 10083-2 2006 non-alloy structural steel BS C50E Datasheet Round Bar from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining.
MATERIAL TECHNICAL DATASHEET - BS C50E
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TYPE OF STEEL: Quality Carbon Structural Steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.47 ~ 0.55
Si (％): ≤ 0.40
Mn (％): 0.60 ~ 0.90
P (％)≤: 0.030
S (％)≤: 0.035
Other (％): Cr + Ni + Mo ≤ 0.63
Si (％): ≤ 0.40
Mn (％): 0.60 ~ 0.90
P (％)≤: 0.030
S (％)≤: 0.035
Other (％): Cr + Ni + Mo ≤ 0.63
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, |σb/MPa|≥: 630
Yield strength, |σs/MPa|≥: 375
Elongation, |δ5(％)|≥: 14
Reduction of area, |ψ(％)|≥: 40
Yield strength, |σs/MPa|≥: 375
Elongation, |δ5(％)|≥: 14
Reduction of area, |ψ(％)|≥: 40
PRODUCT PROFILE & DIMENSION
Round bar (Diameter): 5.5 to 600mm
Square bar / Flat bar: 10 to 550mm
Round bar (Diameter): 5.5 to 600mm
Square bar / Flat bar: 10 to 550mm
Wire rod (Diameter): 1.0 to 13mm
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.20 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
Hot search：C50E
Previous page：Croloy 16-6PH
Last page：665M17
Total list
Monthly rank
- 171.5752
- 13S15 / 5S15
- 12Austenitic steel S131
- 10S132
- 10EN33 / EN 33
- 1035CrMoA
- 1024CrMo5
- 10AMS 6499
- 920Cr1Mo1VTiB
- 928CrMoNiV4-9