C55
2017-08-12 08:43:50 Origin： Remark：0 Click：
Material technical specifications of BS EN Standard 10083-2 2006 non-alloy structural steel BS C55 data sheet, BS C55 Chemical compositions, BS C55 Mechanical properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATION DATASHEET - BS C55
MATERIAL CATEGORY: non-alloy structural steel
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TYPE OF STEEL: Quality Carbon Structural Steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.52 ~ 0.60
Si (％): ≤ 0.40
Mn (％): 0.60 ~ 0.90
P (％)≤: 0.045
S (％)≤: 0.045
Other (％): Cr + Ni + Mo ≤ 0.63
Si (％): ≤ 0.40
Mn (％): 0.60 ~ 0.90
P (％)≤: 0.045
S (％)≤: 0.045
Other (％): Cr + Ni + Mo ≤ 0.63
MECHANICAL PROPERTY
Tensile strength, |σb/MPa|≥: 640
Yield strength, |σs/MPa|≥: 380
Elongation, |δ5(％)|≥: 13.0
Reduction of area, |ψ(％)|≥: 35
Yield strength, |σs/MPa|≥: 380
Elongation, |δ5(％)|≥: 13.0
Reduction of area, |ψ(％)|≥: 35
PRODUCT PROFILE
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 350mm
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 350mm
Wire rod (Diameter): 0.40mm to 13mm
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.20 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: lh.steel@hotmail.com.
Hot search：C55
