Grade 735A54
2018-05-18 11:34:55 Origin： Remark：0 Click：
BS 970-2 -1988 of Alloy Steel 735A54 Round bar, flat bar, Forgings Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test.
RAW MATERIAL SPECIFICATIONS - Grade 735A54
MATERIAL CATEGORY: Alloy Spring steel
MATERIAL SPECIFICATIONS: BS 970-2 -1988
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.52 ~ 0.57
MATERIAL SPECIFICATIONS: BS 970-2 -1988
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.52 ~ 0.57
Silicon, Si (%): 0.20 ~ 0.35
Manganese, Mn (％): 0.90 ~ 1.15
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (%): 1.05 ~ 1.20
Molybdenum, Mo (%): -
Vanadium, V (%): 0.12 ~ 0.20
TYPICAL MECHANICAL PROPERTY
Tensile strength,σb/≥ MPa: -
Yield strength, σ0.2/≥ MPa: -
Yield strength, σ0.2/≥ MPa: -
Elongation, δ ≥(％): -
Reduction of area, (%): -
Condition of delviery: hot rolled
Annealed hardness, HB ≤: 321
MELTING PROCESS
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, EF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
DIMENSIONS & AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 400mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, EF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
DIMENSIONS & AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 400mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
Length: Fixed length or random length or based on the customer's special requirements.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
Previous page：X22CrMoV12-1
Last page：Z7CND18-12-03
