BS 281
2018-06-06 15:20:07 Origin： Remark：0 Click：
Description BS 281 Sheet, Suppliers BS 281 Inventory, Ex-stock BS 281 Plate from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test & Magnetic powder inspection, Cold work, Peeled or rough turned machining. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL DATA SHEET - Grade BS 281
MATERIAL CATEGORY: alloy steel for pressure vessel
MATERIAL SPECIFICATIONS: BS 1501-2 1988
MATERIAL SPECIFICATIONS: BS 1501-2 1988
CHEMICAL COMPOSITIONS (Mass weight - %)
C (％): 0.08 ~ 0.14
C (％): 0.08 ~ 0.14
Si (%): ≤ 0.40
Mn (％): 1.10 ~ 1.50
P (％)≤: 0.025
S (％)≤: 0.015
P (％)≤: 0.025
S (％)≤: 0.015
Cr (%): 0.40 ~ 0.70
Ni (%): 0.60 ~ 1.00
Mo (%): 0.24 ~ 0.30
Cu (%): ≤ 0.30
Al (%): ≤ 0.020
V (%): 0.04 ~ 0.12
TYPICAL MECHANICAL PROPERTY
Tensile strength,σb/≥ MPa: 470 ~ 670
Yield strength, σ0.2/≥ MPa: 350
Yield strength, σ0.2/≥ MPa: 350
Elongation, δ ≥(％): 18.0
Reduction of area, (%): -
Annealed hardness, HB ≤: -
MELTING PROCESS
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
Previous page：Z8CDF19-02
Last page：BS 503
