BS 620
2018-06-12 13:25:57 Origin： Remark：0 Click：
Description BS 620 Plate, Suppliers BS 620 Inventory, Sheet BS 620 Stocklist Shaft PropertY from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test & Magnetic powder inspection, Cold work -Peeled or rough turned machining. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade BS 620
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass Weight - %)
C (％): 0.09 ~ 0.18
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass Weight - %)
C (％): 0.09 ~ 0.18
Si (%): 0.15 ~ 0.40
Mn (％): 0.40 ~ 0.65
P (％)≤: 0.025
S (％)≤: 0.015
P (％)≤: 0.025
S (％)≤: 0.015
Cr (%): 0.80 ~ 1.15
Ni (%): ≤ 0.30
Mo (%): 0.45 ~ 0.60
Cu (%): ≤ 0.30
Al (%): ≤ 0.020
TYPICAL MECHANICAL PROPERTIES
Tensile strength,σb/≥ MPa: 640 ~ 840
Yield strength, σ0.2/≥ MPa: 480
Yield strength, σ0.2/≥ MPa: 480
Elongation, δ ≥(％): 18.0
Reduction of area, (%): -
Annealed hardness, HB ≤: -
MELTING PROCESS
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
Previous page：AMS 5894
Last page：Z8CNF18-09
