BS 625-520
2018-10-09 16:21:37 Origin： Remark：0 Click：
Description BS 625-520 flat bar, Ex-stock BS 625-520 Suppliers, Inventory BS 625-520 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test & Magnetic powder inspection, Cold work, Peeled or rough turned machining. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade BS 625-520
MATERIAL CATEGORY: alloy steel bars, forge pieces for pressure vessel
MATERIAL SPECIFICATIONS: BS 1503 1989
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass weight - %)
C (％): ≤ 0.15
C (％): ≤ 0.15
Si (%): 0.15 ~ 0.40
Mn (％): 0.30 ~ 0.80
P (％)≤: 0.030
S (％)≤: 0.025
P (％)≤: 0.030
S (％)≤: 0.025
Cr (%): 4.00 ~ 6.00
Ni (%): ≤ 0.40
Mo (%): 0.45 ~ 0.65
Cu (%): ≤ 0.30
Al (%): ≥ 0.018
TYPICAL MECHANICAL PROPERTY
Tensile strength,σb/≥ MPa: 590 ~ 740
Yield strength, σ0.2/≥ MPa: 390
Yield strength, σ0.2/≥ MPa: 390
Elongation, δ ≥(％): 17.0
Reduction of area, (%): -
Annealed hardness, HB ≤: 220
MELTING PROCESS
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of VIM + Vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of VIM + Vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Previous page：BS 622-650
Last page：BS 625-590
