K21590
2025-11-26 12:37:00 Origin： Remark：0 Click：
ASTM A387 type K21590 hot rolled plate, round bar inventory, sheet properties from steelmaking, ESR melted, Hot bloomed & forged & rolled, heat treated
TECHNICAL DATA SHEET - K21590
MATERIAL TECHNICAL STANDARDS: ASTM A387 - 2017
Inventory & stock - plate THK 4 ~ 25 X width 1000 ~ 2000mm X Lmm
Material type : Cr2.3 - Mo1.0 alloy structural steel
Typical chemical compositions (mass weight %)
Carbon, C (％): 0.05 ~ 0.15
Carbon, C (％): 0.05 ~ 0.15
Manganese, Mn (％): 0.30 ~ 0.60
Silicon, Si (％): ≤ 0.50
Silicon, Si (％): ≤ 0.50
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): 2.00 ~ 2.50
Molybdenum, Mo (%): 0.90 ~ 1.10
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): 2.00 ~ 2.50
Molybdenum, Mo (%): 0.90 ~ 1.10
Nickel, Ni (%): -
Ferrum, Fe (%): balance.
TYPICAL MECHANICAL PROPERTIES
Tensile strength, Rm ≥ MPa: 415 ~ 585
Yield strength, Rp0.2 / MPa: 205
Elongation, A5 ≥ (％): 18.0
Reduction of area, Z ≥ (％): -
Hardness via heat treatment /HBW: 255 MAX.
Reduction of area, Z ≥ (％): -
Hardness via heat treatment /HBW: 255 MAX.
PRODUCT DESCRIPTION
The alloy is usually produced by EF / EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / rod / disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 8 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 200 X W100 ~ 1500 X L1000 ~ 12000mm
Forging piece: stepped shafts, and other different shapes based on OEM.
The alloy is usually produced by EF / EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / rod / disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 8 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 200 X W100 ~ 1500 X L1000 ~ 12000mm
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：K21590
Previous page：1.2390
Last page：X32CrMoV4-1
Total list
Monthly rank
- 18S135
- 1611SMnPb30
- 15NF 20NC11
- 14EN35B
- 141.7380
- 14SCr435
- 13ASTM 1526/G15260
- 13635H15 / 635M15 / En351
- 131.7005
- 13AISI 8645H