Grade F91 type 2
2019-09-30 11:31:43 Origin: Remark:0 Click:
ASTM A182 Standard Specification F91 type 2 Round bar, Flat bar, Plate and Forgings, P91 ESR melted, Hot forging, Hot rolling, Heat treatment
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 9.0Cr - 1.0Mo - 0.2V Alloy steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.08 ~ 0.12
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.08 ~ 0.12
Manganese, Mn (%): 0.30 ~ 0.50
Silicon, Si (%): 0.20 ~ 0.40
Silicon, Si (%): 0.20 ~ 0.40
Phosphorus, P (%)≤: 0.020
Sulfur, S (%)≤: 0.005
Chromium, Cr (%): 8.00 ~ 9.50
Molybdenum, Mo (%): 0.85 ~ 1.05
Sulfur, S (%)≤: 0.005
Chromium, Cr (%): 8.00 ~ 9.50
Molybdenum, Mo (%): 0.85 ~ 1.05
Nickel, Ni (%): ≤ 0.20
Niobium, Nb (%): 0.05 ~ 0.11
Titanium, Ti (%): ≤ 0.01
Nitrogen, N (%): 0.035 ~ 0.07
Vanadium, V (%): 0.18 ~ 0.25
Copper, Cu (%): ≤ 0.10
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 620
Yield strength, σ0.2/MPa: 415
Elongation, δ ≥(%): 20.0
Reduction of area, ф ≥ (%): 40.0
Hardness via heat treatment /HBW: 190 ~ 248
Reduction of area, ф ≥ (%): 40.0
Hardness via heat treatment /HBW: 190 ~ 248
HEAT TREATMENT PRACTICE
Condition: Solution annealed 1040 ~ 1080 Deg. C
Cooling medium: air cool
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W200 ~ 1000mm X L1000 ~ 2000mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W200 ~ 1000mm X L1000 ~ 2000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Total list
Monthly rank
- 69ASTM A739 Gr. B11
- 6824CrMo5
- 4538NCD4
- 29EN33 / EN 33
- 27EN19A
- 24EN52
- 23EN 355
- 22815M17
- 2134CrNiMo6V
- 211.6772