K41910
2019-12-16 13:27:20 Origin： Remark：0 Click：
K41910 Global Wholesalers Steel,K41910 Alloy Suppliers & Manufacturers,K41910 Forge bar plate machined, K41910 Alloy exporter, from Melting, ESR & VAR technique, Hot blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test,
TECHNICAL DATA SHEET - Grade K41910
MATERIAL TYPE: Carburizing steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.17 ~ 0.22
Si (％): 0.15 ~ 0.40
Mn (％): 0.30 ~ 0.60
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.17 ~ 0.22
Si (％): 0.15 ~ 0.40
Mn (％): 0.30 ~ 0.60
P (％)≤: 0.025
S (％)≤: 0.015
Cr (%): 0.80 ~ 1.20
Mo (%): 0.30 ~ 0.50
S (％)≤: 0.015
Cr (%): 0.80 ~ 1.20
Mo (%): 0.30 ~ 0.50
Ni (%): 3.00 ~ 3.50
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1210
Yield strength, σ0.2/MPa: 950
Elongation, δ ≥(％): 7.0
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: 375 ~ 450
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: 375 ~ 450
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF / VIM followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by EAF / BEF / VIM followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：K41910
Previous page：20NiCrMo13-4
Last page：1.6660
