1.5663 Stockist, 1.5663 Equivalent Steel

1.5663
2020-03-10 12:42:06   Origin:   Remark:0 Click:

Description 1.5663 Specifications, Flat bar 1.5663 Ex-stock, Shaft 1.5663 Suppliers Forging Bar Plate,Grade Specifications Melting, ESR & VAR technique, Hot blooming, Hot forging Rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.
TECHNICAL DATA SHEET - Grade W-Nr 1.5663
MATERIAL CATEGORY: Low temperature alloy steel
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - heat treatment / QT 
MATERIAL SPECIFICATIONS - DIN EN 10028-2 (2003), DIN 17755 (1983) 
CHEMICAL COMPOSITION (Mass weight - %)
C (%):     ≤ 0.10
Si (%):    ≤ 0.35
Mn (%):   0.30 ~ 0.80
P (%)≤:   0.015
S (%)≤:   0.005
Cr (%):    —
Ni (%):    8.50 ~ 10.0
V (%):     ≤ 0.01
Other (%): Mo ≤ 0.10, Cr+Cu+Mo ≤ 0.50%
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working temperature /℃:    1050~850
Heat treatment temperature /℃|annealing / normalizing :   880~930
Heat treatment temperature /℃|quenching:    770~830 water, oil
Heat treatment temperature /℃|tempering:    540~600
Normal temperature and low temperature | Condition:   Room temperature
Tensile strength, (≥)|σb/MPa: 680 ~ 820
Yield strength, (≥)|σs/MPa: 575
Elongation, (≥)|δ5(%): 18.0
Reduction of area, (≥)|ψ(%)≥:  -
Impact strength, (≥)|AKv (DVM)/J: 120         
AVAILABLE SHAPES  
Round bar / flat bar / Square bar / strip / sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PRODUCT PROFILE  
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 1000mm
Plate / Sheet steel / Steel strip: 0.5mm to 500mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on. 
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolts and nuts.
Multidiameter shaft.
Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers, Email: sales@ccsteels.com

Hot search:1.5663

Previous page:1.5680
Last page:Aquamet 22

Share to: