1.3566
2020-07-16 16:51:47 Origin： Remark：0 Click：
Description 1.3566 datasheet, 1.3566 Chemical, 1.3566 Properties Steelmaking, ESR & VAR technique, Blooming, Hot forging & rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Test Certificate Report: issued by TUV - SGS - BV
TECHNICAL SPECIFICATIONS - 1.3566
MATERIAL TYPE: Case hardening bearing steel
MATERIAL STANDARDS: ISO 683/17
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.12 ~ 0.18
Si (％): ≤ 0.40
Mn (％): 0.60 ~ 0.90
P (％)≤: 0.025
S (％)≤: 0.015
Cr (%): 0.90 ~ 1.20
Mo (%): 0.15 ~ 0.25
Ni (%): -
Other (%): Cu ≤0.30, Al ≤0.050
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + AC = Spheroidizing annealing
Hardness /≤HBW: 170
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + AC = Spheroidizing annealing
Hardness /≤HBW: 170
Condition: + A = annealing
Hardness /≤HBW: 207
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 50mm X W50 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Hardness /≤HBW: 207
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 50mm X W50 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：1.3566
