EN36C Stockist, EN36C Equivalent Steel

EN36C
2020-12-16 11:32:22   Origin:   Remark:0 Click:

Description EN36C datasheet, EN36C Chemical, EN36C Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL DATASHEET - EN36C

OFFICIAL TEST CERTIFICATE - issued by TUV - SGS -  BV
MATERIAL CATEGORY- BS 970 Part 4 low alloy structural steel
TYPE OF STEEL - 3.0% Ni Cr Mo alloy steel
C (%):    0.12 ~ 0.17
Si (%):    0.10 ~ 0.40
Mn (%):  0.30 ~ 0.60
P (%)≤:  0.035
S (%)≤:  0.030
Cr (%):   0.80 ~ 1.10
Ni (%):   3.00 ~ 3.50
Mo (%): 0.20 ~ 0.30
TYPICAL MECHANICAL PROPERTIES
Condition: Heat treatment
Diameter 11mm
Tensile strength σb≥/MPa: 1130~1430
Yield strength σs≥/MPa:      -
Elongation δ5≥(%): 9.0
AKV≥/J: -
Hardness HBS:  -
Diameter 63mm
Tensile strength σb≥/MPa: 880~1180
Yield strength σs≥/MPa:      -
Elongation δ5≥(%): 11.0
AKV≥/J:    -
Hardness HBS:  -
            -
TYPICAL APPLICATIONS
Alloy structural
steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe

PRODUCT PROFILE & AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 600mm
Wire rod (Diameter): 0.2mm to 16mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM. 
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail:
sales@ccsteels.com. sal s sal  

Hot search:EN36C

Previous page:DTD 519
Last page:ASTM A514 Gr.B

Share to: