Z15CD5-05 Stockist, Z15CD5-05 Equivalent Steel

Z15CD5-05
2025-05-19 11:41:00   Origin:   Remark:0 Click:

Description Z15CD5-05 Plate, Suppliers Z15CD5-05 Stocklist, Inventory Z15CD5-05 properties from Steelmaking, ESR melted, Blooming, Hot forging/rolling, Heat treatment

Official Test Certificate: issued by TUV - SGS -  BV

TECHNICAL DATASHEET - NF Z15CD5-05
MATERIAL STANDARDS: NF A35-558
INVENTORY STOCKLIST - bright round bar diameter 55mm  ~ 120mm
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITIONS (mass weight %)
Carbno, C (%): 0.10 ~ 0.20
Silicon, Si (%): 0.15 ~ 0.50
Manganese, Mn (%): 0.20 ~ 0.60
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.020
Chromium, Cr (%): 4.00 ~ 6.00
Nickel, Ni (%): -
Molybdenum, Mo (%): 0.40 ~ 0.65
MATERIAL TYPE - high temperature bolting steel
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Quenched and tempered
Tensile strength σb ≥ MPa: 590~740
Yield strength σs ≥ MPa: 390
Elongation δ5 ≥ (%): 17.0
Reduction of area  ψ (%) ≥:   -
PRODUCT DESCRIPTION
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - QT. 
PROFILE AND DIMENSION
Round bar / rod (diameter): 5.5mm to 800mm
Square bar / flat bar: 8mm to 600mm
Length: random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
,  

Hot search:Z15CD5-05

Previous page:SAE 4119
Last page:1.4317

Share to: