E16NCD13
2025-12-22 11:00:00 Origin： Remark：0 Click：
Material specification case hardening low alloy steel E16NCD13 heat treated round bar, flat bar, plate, ESR melted, E16NCD13 shaft, heat treated
TECHNICAL DATA SHEET - E16NCD13
Technical specifications: DGA - AIR 9160/C - 1973
Official test report: issued by TUV - SGS
Material type: case hardening low alloy steel
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.12 ~ 0.17
Silicon, Si (％): 0.15 ~ 0.40
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.12 ~ 0.17
Silicon, Si (％): 0.15 ~ 0.40
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (%): 0.80 ~ 1.10
Nickel, Ni (%): 3.00 ~ 3.50
Molybdenum, Mo (%): 0.20 ~ 0.30
Copper, Cu (%): ≤ 0.35
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb ≥ MPa: 1180 ~ 1380
Yield strength, σ0.2 ≥ MPa: 980
Elongation, δ5 ≥ (％): 8.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
QT hardness | HB: 340 ~ 410
Yield strength, σ0.2 ≥ MPa: 980
Elongation, δ5 ≥ (％): 8.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
QT hardness | HB: 340 ~ 410
Quenching/Solution treated, 825,+/-10 Deg, tempering 190, +/-5 Deg.
PROFILE AND DIMENSION
Round bar & rod & disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 10 to 500 mm
Steel strip: T0.20 ~ 3 X W10 ~ 300 X L mm in Coil
Forging piece: stepped shafts, other different shapes based on OEM.
PROFILE AND DIMENSION
Round bar & rod & disc (diameter): 6.0 to 800 mm
Square bar / flat bar: 10 to 500 mm
Steel strip: T0.20 ~ 3 X W10 ~ 300 X L mm in Coil
Forging piece: stepped shafts, other different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Hot search：E16NCD13
Total list
Monthly rank
- 60S132
- 2426NiCrMoV14-5
- 2338B3
- 21EN33 / EN 33
- 2030Mn5
- 2016CrMo4
- 17ASTM A739 type B11
- 1734CrNiMo6V
- 1730CrMnSiNi2A
- 1632CrMoV13